European Assessment Documents欧洲技术评估(EADs)/ ETA认证
欧洲技术评估(ETA)是一份根据建筑产品基本特征提供其性能信息的声明文件，自2013年7月1日起在所有欧洲成员国和欧洲经济区生效的《新建筑产品条例(欧盟)第305/2011号》中已有ETA认证的相关诠释。建筑建材产品的ETA认证是对产品在指定应用范围技术性能的有力证明，由建筑材料制造商自愿申请。建筑建材类产品可以申请ETA认证的前提是：建筑产品不在或不受任何欧洲统一标准(hEN)及其评估方法和载于标准欧洲评估文件(EAD)中，当产品通过ETA符合性证明程序，满足ETA相关标准，欧洲技术认可认证机构将允许制造商在产品上标注CE标识。迈希泽在eta认证领域内有丰富的经验。
欧盟建材(EADs)/ ETA认证的变化
根据ETAs的有关规定：截至2013年6月30日(即欧洲批准)的ETAs在其有效期结束之前仍然有效，可以被制造商用作欧洲技术评估，但这种类型的ETAs在2018年将从市场上消失，在2013年7月1日之后发布的ETA的有效期是不确定的。
根据 (欧盟)第305/2011号(CPR) 规定，建筑材料制造商在市场上发布建筑产品和当该产品被欧洲技术评估(ETA)评估时，应负责提供该产品的性能声明(DoP)。经评估通过后，CE标志应贴在该产品上，并表明制造商对该产品与声明的性能相符负有责任。
欧盟建材(EADs)/ ETA认证所需提交的文件
1、The Application Form 产品认证申请表
2、Description of the construction product 建筑建材类产品说明
3、Product specifications 产品规格书
4、Test reports 产品检测报告（如生产商曾为该产品申请检测）
5、Drawings 产品爆炸图
6、The intended use of the product 产品使用说明
ETA认证流程
一、确定产品ETAG标准（技术评估大纲）
迈希泽为产品符合的指令为欧盟建筑产品指令(EU) 305/2011(CPR)，欧盟协调标准便是用来指导产品满足指令基本要求的详细技术文件。
二、确定产品应符合的详细要求
产品满足其所适用的所有协调标准的要求,才被视为符合相关的基本要求。是否适用协调标准完全是自愿的，您也可以选择其他方式来满足相应的基本要求。
三、确定产品是否需要公告机构参与检验
您的产品所涉及到的每一个指令都对是否需要由第三方公告机构来参与ETA的审核有详细的规定。这些公告机构都是由欧盟委员会授权的，并在NANDO（ 新方法指令公告机构及指定机构）的档案中有详细的清单。
四、测试产品并检验其符合性
制造商有责任对产品进行测试并且检查其是否符合欧盟法规（符合性评估流程），风险评估是评估流程中的基础规则，满足了欧盟相关协调标准的要求后，您才有可能满足欧盟官方法规的基本要求。
五、起草并保存ETAG标准要求的技术文件
制造商必须根据产品所符合指令的要求及风险评估的需要，建立产品的技术评估文件European Assessment Document (EAD)。如果相关授权部门要求，制造商须将技术文件及EC符合性声明一起提交检查。
六、在您的产品上加贴ETA标志并做EC符合性声明
ETA标志必须由制造商或其授权代表加贴在产品上。ETA标志必须按照其标准图样，清楚且永远的贴在产品或其铭牌上。如果公告机构参与了产品的认证，则ETA标志必须带有公告机构的公告号。制造商有义务起草EC符合性声明，并在其上签字以证明产品满足ETA要求。经过以上六个步骤，您的贴有ETA标志的产品便可以在欧洲市场顺利流通了。
欧盟建材ETA认证目录/EADs认证目录
Legislation : Regulation (EU) No 305/2011 - Construction products
EAD 150003-00-0301 - High strength cement
EAD 010001-00-0301 - Precast concrete composite wall with point connectors
EAD 010003-00-0301 - Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC)
EAD 010013-00-0301 - Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing
EAD 010028-00-0103 - Shallow and reusable foundation kit for lightweight structures
EAD 020001-01-0405 - Multi-axis concealed hinge assemblies
EAD 020002-00-0404 - Balcony (and terrace) glazing system without vertical frames
EAD 020011-00-0405 - Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance.
EAD 020029-00-1102 - Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel
EAD 030019-00-0402 - Liquid applied roof waterproofing on the basis of polysiloxane
EAD 030065-00-0402 - Composite roof waterproofing kit
EAD 030092-00-0605 - Non-flexible mineral sealing slurry kit on the basis of cement
EAD 030218-00-0402 - Membrane for use as roof underlay
EAD 040005-00-1201 - Factory-made thermal and/or acoustic insulation products made of vegetable or anymal fibres
EAD 040007-00-1201 - Thermal insulation products for buildings with radiant heat reflective component
EAD 040010-00-1201 - Insulation product made of expanded perlite (EPB)
EAD 040011-00-1201 - Vacuum insulation panels (VIP) with factory applied protection layers
EAD 040012-00-1201 - thermal insulation board made of mineral material
EAD 040016-00-0404 - Glass fibre mesh for reinforcement of cement based renderings
EAD 040037-00-1201 - Low lambda composite boards made of mineral wool fibres and aerogel additives
EAD 040048-01-0502 - Rubber fibre mat to be used for impact sound insulation.
EAD 040049-00-0502 - Polyurethane (PU) foam mat to be used for impact sound insulation
EAD 040057-00-1201 - Thermal insulation board made of microporous silica
EAD 040065-00-1201 - Thermal insulation an/or sound absorbing boards based on expanded polystyrene and cement
EAD 040089-00-0404 - External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings
EAD 040090-00-1201 - Factory-made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/ or acoustical insulation
EAD 040138-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres
EAD 040287-00-0404 - Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin
EAD 040288-00-1201 - Factory-made thermal and acoustic insulations made of polyester fibres
EAD 040313-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork
EAD 040369-00-1201 - Insulation made of loose-fill or compound granulated expanded cork
EAD 040394-00-1201 - Factory made cellular glass loose fill
EAD 040456-00-1201 - In-situ formed loose-fill thermal and/or acoustic insulation material made of animal fibres
EAD 040461-00-1201 - thermal insulation product made of loose fill expanded perlite (EP)
EAD 040635-00-1201 - Thermal and/or sound insulation based on bound expanded polystyrene bulk material
EAD 040643-00-1201 - Fiber reinforced silica aerogel thermal insulation
EAD 040650-00-1201 - Extruded polystyrene foam boards as load bearing layer and/or thermal insulation outside the waterproofing
EAD 040777-00-1201 - Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing
EAD 050001-00-0301 - Load bearing thermal insulating elements which form a thermal break between balconies and internal floors
EAD 050004-00-0301 - Spherical and cylindrical bearing with special sliding material made of UHMWPE (Ultra high molecular weight poyethylene)
EAD 050009-00-0301 - Spherical and cylindrical bearing with special sliding material made of fluoropolymer
EAD 050013-00-0301 - Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres
EAD 060001-00-0802 - Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1 W3 Gxx
EAD 060003-00-0802 - Chimney kit with clay/ceramic flue liner and with specific outer wall with classification T 400 (minimum) N1 W 3 Gxx
EAD 060008-00-0802 - Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1/P1 W 3 Gxx and with different outer walls and possible change of outer wall
EAD 070001-01-0504 - Gypsum plasterboard for load bearing applications
EAD 070002-00-0505 - Glass fibre joint tape for gypsum plasterboards
EAD 080001-00-0403 - geocomposite for drainage system
EAD 080002-00-0102 - Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate
EAD 090001-00-0404 - Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system
EAD 090017-00-0404 - Point supported vertical glazing
EAD 090019-00-0404 - Kits for ventilated external wall claddings of lightweight boards on subframe with rendering applied in situ with or without thermal insulation
EAD 090020-00-0404 - Kits for external wall claddings made of agglomerated stone
EAD 090034-00-0404 - Kit composed by subframe and fixings for fastening cladding and external wall elements
EAD 090035-00-1201 - Insulated glass unit with structural sealant punctually anchored
. EAD 090058-00-0404
More Info EAD 090058-00-0404 - Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings
EAD 120001-01-0106 - Microprismatic retro-reflective sheetings
EAD 120003-00-0106 - Steel lighting columns
EAD 120011-00-0107 - Flexible plug expansion joints for road bridges with flexible filling EAD 130002-00-0304 - Solid wood slab element - element of dowel jointed timber boards to be used as a structural element in buildings
EAD 130005-00-0304 - Solid wood slab element to be used as a structural element in buildings
EAD 130010-00-0304 - Glued laminated timber made of hardwood - structural laminated veneer lumber made of beech
EAD 130011-00-0304 - Prefabricated wood slab element made of mechanically jointed square-sawn timber members for use as structural element in buildings
EAD 130012-00-0304 - Strength graded structural timber - square edged logs with wane - chestnut
EAD 130013-00-0304 - Solid wood slab element to be used as a structural element in buildings - element of timber boards jointed by dovetail connections
EAD 130019-00-0603 - Dowel-type fasteners with resin coating
EAD 130022-00-0304 - Monolithic or laminated beam and wall logs made of timber
EAD 130033-00-0603 - Nails and screws for use in nailing plates in timber structures
EAD 130087-00-0204 - Modular construction system
EAD 130089-00-0304 - Structural wet and/or cold glued finger jointed solid timber
EAD 130090-00-0303 - Wood-concrete composite slab with dowel-type fasteners
EAD 130118-00-0603 - Screws for use in timber constructions
EAD 130166-00-0304 - Strength graded structural timber — steam-cured solid timber with rectangular cross section which may be finger jointed or not — softwood
EAD 130167-00-0304 - Strength graded structural timber - square edged logs with wane - softwood
EAD 130191-00-0304 - Prefabricated wood slab element made of jointed cross laminated log elements to be used as a structural element in buildings
EAD 130197-00-0304 - Glued laminated timber made of steam-cured solid timber with rectangular cross section – Softwood
EAD 140015-00-0304 - Walls, roofs and ceilings made of OSB-panels which are glued together on their surfaces
EAD 150001-00-0301 - Calcium sulphoaluminate based cement
EAD 150002-00-0301 - Calcium aluminate based refractory cement
EAD 150004-00-0301 - Rapid hardening sulfate resistant calcium sulphoaluminate based cement
EAD 150007-00-0301 - Portland-pozzolana cement for use in tropical conditions
EAD 150008-00-0301 - Rapid setting cement
EAD 150009-00-0301 - Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH)
EAD 160003-00-0301 - Double headed studs for the increase of punching shear resistance of flat slabs or footings and ground slabs
EAD 160004-00-0301 - Post-tensioning systems for prestressing of structures
EAD 160012-00-0301 - Headed reinforcement steel bars
EAD 160027-00-0301 - Special filling products for post-tensioning kits
EAD 180003-00-0704 - Gully tops and manhole tops made of the polyamide (PA) for external vehicular and pedestrian areas
EAD 180008-00-0704 - Trapped gully - removable - mechanical closure
EAD 180018-00-0704 - Flexible couplings for gravity and pressure sewerage and drainage pipes
EAD 190002-00-0502 - Dry floating flooring kit based on prefabricated interlocked units made of ceramic tiles and rubber mats
EAD 190005-00-0402 - Terrace decking kit
EAD 200001-00-0602 - Prefabricated steel and stainless steel wire ropes with end connectors
EAD 200002-00-0602 - Tension Rod System
EAD 200005-00-0103 - Structural steel piles with hollow sections and rigid splices
EAD 200012-00-0401 - Spacer kits for built-up metal roof and wall claddin
EAD 200014-01-0103 - Pile Joints and Rock shoes for concrete piles
EAD 200017-00-0302 - Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B AND Q345D
EAD 200019-00-0102 - Hexagonal woven mesh gabion boxes and mattresses
EAD 200020-00-0102 - Weldmesh gabion boxes and mattress
EAD 200022-00-0302 - Thermo-mechanically rolled long steel products made of weldable fine grain structural steel of special steel grades
EAD 200026-00-0102 - Steel mesh systemss for reinforced fill
EAD 200032-00-0602 - Prefabricated tension rod systems with special end connectors
EAD 200033-00-0602 - Nailed shear connector
EAD 200035-00-0302 - Roof and wall systems with hidden fastenings
EAD 200036-00-0103 - Kit for micropiles — Kit with hollow bars for self-drilling micropiles — Hollow bars of seamless steel tubes
EAD 200039-00-0102 - Hexagonal woven gabion boxes and mattresses with zinc coatings
EAD 200043-01-0103 - Pile pipes made of ductile iron
EAD 200050-01-0102 - Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh with pre-coated zinc and/or zinc+organic coating.
EAD 200086-00-0602 - Wire ring connection products
EAD 210004-00-0805 - Modular element for building services
EAD 210024-00-0504 - Cement-bonded boards
EAD 220006-00-0402 - Roofing slates made of polypropylene, limestone and fillers
EAD 220007-00-0402 - Fully supported copperalloysheet and strip for roofing, externalcladding and internal lining
EAD 220008-00-0402 - Eaves profiles for terraces and balconies
EAD 220010-00-0402 - Flat plastic sheets for fully supported discontinuous roofing and external cladding
EAD 220013-01-0401 - Self–supporting ridgelight.
EAD 220018-00-0401 - Decentralized energy efficient low-pressure ventilation unit with alternating flow and heat recovery
EAD 220021-00-0402 - Sun tunnel kits
EAD 220022-00-0401 - Polycarbonate snow stopper for roof
EAD 220025-00-0401 - Cantilevered Structural horizontal glazing (structural glass canopy/roof)
EAD 220069-00-0402 - Flat and profiled (with a pattern) plastic roofing sheets made of recycled material for fully supported discontinuous roofing
EAD 230004-00-0106 - Wire ring mesh panels
EAD 230005-00-0106 - Wire rope net panels
EAD 230008-00-0106 - Double twisted steel wire mesh reinforced or not with ropes
EAD 230011-00-0106 - Road marking products
EAD 230012-00-0105 - Additives for asphalt production - bitumen granules made from recycled bituminous roofing felt
EAD 230012-01-0105 - additives for asphalt production - additive from bitumen granules made from recycled bituminous roofing felt
EAD 230025-00-0106 - Flexible facings systems for slope stabilization and rock protection
EAD 260001-00-0303 - Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites)
EAD 260002-00-0301 - Alkali resistant glass fibres containing zirconium dioxide for use in concrete
EAD 260006-00-0301 - Polymeric concrete addition
EAD 260007-00-0301 - Type I addition for concrete, mortar and screed materials – Aqueous solution
EAD 260009-00-0301 - Processed bottom ash from municipal solid waste incinerators as type II addition for production of concrete, mortar and grout
EAD 260035-00-0301 - Natural calcined pozzolana as type II addition for concrete
EAD 280001-00-0704 - Preassembled line unit for drainage or infiltration
EAD 290001-00-0701 - Kit for the transport of cold and hot water inside buildings
EAD 320002-02-0605 - Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete
EAD 320008-00-0605 - Swellable joint sealing tape on the basis of bentonit for construction joints in watertight concrete
EAD 330001-00-0602 - Expanding Structural Bolting Assemblies for Blind Fastening
EAD 330008-02-0601 - Anchor channels
EAD 330011-00-0601 - Adjustable concrete screws
EAD 330012-00-0601 - Cast-in anchor with internal threaded socket
EAD 330014-00-0601 - Metal expansion fastener for use in autoclaved aerated concrete
EAD 330046-01-0602 - 330046-01-0602
EAD 330047-01-0602 - Fastening screws for sandwich panels
EAD 330075-00-0601 - Elevator lifting device
EAD 330076-00-0604 - Metal injection anchors for use in masonry.
EAD 330079-00-0602 - Floor fixing assemblies for use in checker plate or open bar grating
EAD 330080-00-0602 - High Slip Resistance Clamp (HSR) Assembly
EAD 330083-02-0601 - Power-actuated fastener for multiple use in concrete for non-structural applications.
EAD 330084-00-0601 - Steel plate with cast-in anchor
EAD 330087-00-0601 - Systems for post-installed rebar connections with mortar
EAD 330153-00-0602 - Cartridge fired pin for connections of thin gauge steel members and sheeting
EAD 330155-00-0602 - Self adjustable clamp assemblies
EAD 330196-01-0604 - Plastic anchors made of virgin or non-virgin material for fixing of external thermal insulation composite systems with rendering
EAD 330232-00-0601 - Mechanical fasteners for use in concrete
EAD 330389-00-0601 - Point connector of glass fibre reinforced polymer for sandwich walls
EAD 330499-00-0601 - Bonded fasteners for use in concrete
EAD 330667-00-0602 - Hot-rolled mounting channel
EAD 330747-00-0601 - fasteners for use in concrete for redundant non-structural systems
EAD 330924-00-0601 - Cast-in anchor bolts of ribbed reinforcing steel
EAD 330965-00-0601 - Powder actuated fastener for the fixing of ETICS in concrete
EAD 331852-00-0102 - spiral cable anchor
EAD 340002-00-0204 - Panels of steel wires with incorporated thermal insulation for a whole structure
EAD 340006-00-0506 - Prefabricated stair kits
EAD 340020-00-0106 - Flexible kits for retaining debris flows and shallow landslides/open slope debris flows
EAD 340025-00-0403 - Substructure kit for heated buildings
EAD 340037-00-0204 - Light weight steel/wood load bearing roof elements
EAD 350003-00-1109 - Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories
EAD 350005-00-1104 - Intumescent products for fire sealing and fire stopping purposes
EAD 350022-01-1107 - Kit for closure system for conveyor systems
EAD 350134-00-1104 - Fire proof water trap with intumescent fire seal (combined with a stainless steel floor gully penetration)
EAD 350140-00-1106 - Renderings and rendering kits intended for fire resistant applications
EAD 350141-00-1106 - Linear joint and gap seals
EAD 350142-00-1106 - Fire protective board, slab and mat products and kits
EAD 350402-00-1106 - Reactive coatings for fire protection of steel elements
EAD 350454-00-1104 - Fire stopping and fire sealing products - Penetration seals
EAD 360001-00-0803 - Ventilation system made of mineral wool covered with film (outside and EAD 360005-00-0604 - Cavity tray
欧洲(EADs)/ ETA认证认证成员
EOTA成员有：捷克共和国TZUS&CSI、迈希泽eta认证、斯洛伐克共和国TSUS、奥地利OIB、比利时BUTGA、塞浦路斯PWD、丹麦ETA-DANMARK、爱沙尼亚TUT、芬兰VTT、法国CSTB&SETRA、德国DIBt、希腊ELOT、匈牙利EMI、冰岛NMI、意大利STC&CSEA、迈希泽eta认证、立陶宛SPSC、卢森堡PCH、荷兰SBK&INTRON&SKH&IKOB-BKB BV&BMC&SKG&KIWA&TNO、挪威SIN TEF、波兰ITB、葡萄牙LNEC、斯洛文尼亚ZAG、西班牙IETc c &ITeC、瑞典SITAC、瑞士EMPA、土耳其ITBAK。
迈希泽提供ETA认证，ETA报告，ETA评估报告，锚栓ETA认证，预埋件ETA认证，车修壁虎eta认证，植筋胶eta认证等产品的eta认证服务，
如有以上认证需求可以联系我司：021-52968370
扫一扫添加微信